overhaul begins part 2 (se6)

Show off your Projects here, the link for the garage is at the top of the page for showcasing your car

overhaul begins part 2 (se6)

by craigyboy » Tue Aug 25, 2015 8:39 pm

after the se6 sitting for a while I thought it was time to
start the project again. I have stripped out the full interior
cut out the bad bits in the floor.I used cardboard to mark out
the templates and used them to mark up the steel to cut it
I then welded them in place.


Image



Image


Once the engine was out I noticed the same old bit was rotten on the bulkhead, so
I cut that out and welded in a new part of steel.I then tidyed up the rest of the engine
bay and gave it a lick of paint.

[URL=http://s1205.photobucket.com/user/craig172/media/billing/2015-06/20150822_172957.jpg.html]Image[/URL
craig

Best Presented Billing 2011
User avatar
ClubCalibra.net
ClubCalibra.net
 
Posts: 1675
Joined: Sat Mar 13, 2004 4:27 pm
Location: Glasgow

Re: overhaul begins part 2 (se6)

by craigyboy » Tue Aug 25, 2015 8:48 pm

Gave the engine bay a clean and a couple of coats of paint
Also had to make up a new off side brake pipe as the old one
was badly corroded.

Image

The next job was to get the block tidied up , so I brushed it with
engine gunk and pressure washed it.I then gave it a couple of coats
of engine lacquer .

Image

Image
craig

Best Presented Billing 2011
User avatar
ClubCalibra.net
ClubCalibra.net
 
Posts: 1675
Joined: Sat Mar 13, 2004 4:27 pm
Location: Glasgow

Re: overhaul begins part 2 (se6)

by craigyboy » Tue Aug 25, 2015 9:05 pm

In wrong order but heres a few pics of the engine coming out.


Image

Image
craig

Best Presented Billing 2011
User avatar
ClubCalibra.net
ClubCalibra.net
 
Posts: 1675
Joined: Sat Mar 13, 2004 4:27 pm
Location: Glasgow

Re: overhaul begins part 2 (se6)

by KERR_SE9 » Tue Aug 25, 2015 9:06 pm

Nice work!
ClubCalibra.net
ClubCalibra.net
 
Posts: 900
Joined: Sun Jul 17, 2005 12:00 pm

Re: overhaul begins part 2 (se6)

by rich30mex » Tue Aug 25, 2015 9:26 pm

Looking good pal
THE TEA BAG Calibra l,e number 4
THE WELLY rio verdi ecotec on a N reg
UNCLE ALBERT gray 8v on a J reg

Best engine bay 2011
Best engine bay 2014
Best in show 2016
Treasures cup 2016
Best engine bay 2017
Best modern retro total retro 2018

mag features
practical classics
modern classic
performance vauxhall


Have car have cloth will clean need life
User avatar
Events Coordinator
Events Coordinator
 
Posts: 3165
Joined: Sat Jan 03, 2009 11:19 am
Location: a hovel

Re: overhaul begins part 2 (se6)

by craigyboy » Tue Aug 25, 2015 10:06 pm

Thanks guys, pity the pictures have came on the wrong way.
Next job is to take off the rocker cover,sump and engine brackets
and get them down to the powder coaters.
craig

Best Presented Billing 2011
User avatar
ClubCalibra.net
ClubCalibra.net
 
Posts: 1675
Joined: Sat Mar 13, 2004 4:27 pm
Location: Glasgow

Re: overhaul begins part 2 (se6)

by v6 steve » Tue Aug 25, 2015 10:44 pm

looking good mate

turn up the power on your welder youll get better welds
steve
Chairman

The Drain

LE 4x4 turbo

SE2 4x4 turbo RIP
User avatar
ClubCalibra.net
ClubCalibra.net
 
Posts: 7178
Joined: Wed Jan 03, 2007 6:58 pm
Location: lanarkshire

Re: overhaul begins part 2 (se6)

by Callyscot » Tue Aug 25, 2015 11:03 pm

nice work Craig :clap:
Now with 2XSe9 V6 flame red calibra's
Best Presented Billing 2009
Best Interior Billing 2010
Not there Billing 2011 but I'll be back 2012
Flooded out 2012
Best year yet 2013Best in Show
Best Interior 2014
and 1 German (Vorsprung Durch Technik) Coupe
User avatar
ClubCalibra.net
ClubCalibra.net
 
Posts: 274
Joined: Tue Feb 10, 2004 1:00 pm
Location: Falkirk,Central Scotland,UK

Re: overhaul begins part 2 (se6)

by Mark1 » Wed Aug 26, 2015 6:00 am

Have you moved, as the suns out :)
Mark...........It's Red........It's a V6............It's an SE9!..............and She's bad.
Mark1@clubcalibra.net

ClubCalibra Best Presented 2006
ClubCalibra Best Presented 2010
ClubCalibra Best Interior 2011

My Garage
User avatar
Club Treasurer
Club Treasurer
 
Posts: 3133
Joined: Sat Jan 10, 2004 1:00 pm
Location: Surrey, England

Re: overhaul begins part 2 (se6)

by sealeysonic » Wed Aug 26, 2015 10:28 am

Great progress....!

Sent from my C5303 using Tapatalk
ClubCalibra.net
ClubCalibra.net
 
Posts: 144
Joined: Tue Mar 10, 2015 10:38 pm

Re: overhaul begins part 2 (se6)

by craigyboy » Wed Aug 26, 2015 4:55 pm

The welds not the best because i'm using flux cored wire instead of gas
I've been told in the past that it's a tidier weld with the gas.
craig

Best Presented Billing 2011
User avatar
ClubCalibra.net
ClubCalibra.net
 
Posts: 1675
Joined: Sat Mar 13, 2004 4:27 pm
Location: Glasgow

Re: overhaul begins part 2 (se6)

by craigyboy » Sat Sep 12, 2015 7:15 pm

Picked all my engine parts and a few other bits up from
the powder coater's yesterday.So all I am waiting on
now is for my silicone hoses to arrive and I will be
putting the engine back in.

Image
craig

Best Presented Billing 2011
User avatar
ClubCalibra.net
ClubCalibra.net
 
Posts: 1675
Joined: Sat Mar 13, 2004 4:27 pm
Location: Glasgow

Re: overhaul begins part 2 (se6)

by craigyboy » Sat Sep 12, 2015 7:15 pm

Picked all my engine parts and a few other bits up from
the powder coater's yesterday.So all I am waiting on
now is for my silicone hoses to arrive and I will be
putting the engine back in.

Image
craig

Best Presented Billing 2011
User avatar
ClubCalibra.net
ClubCalibra.net
 
Posts: 1675
Joined: Sat Mar 13, 2004 4:27 pm
Location: Glasgow

Re: overhaul begins part 2 (se6)

by rich30mex » Sat Sep 12, 2015 7:32 pm

Looks great pal
THE TEA BAG Calibra l,e number 4
THE WELLY rio verdi ecotec on a N reg
UNCLE ALBERT gray 8v on a J reg

Best engine bay 2011
Best engine bay 2014
Best in show 2016
Treasures cup 2016
Best engine bay 2017
Best modern retro total retro 2018

mag features
practical classics
modern classic
performance vauxhall


Have car have cloth will clean need life
User avatar
Events Coordinator
Events Coordinator
 
Posts: 3165
Joined: Sat Jan 03, 2009 11:19 am
Location: a hovel

Re: overhaul begins part 2 (se6)

by craigyboy » Fri Oct 09, 2015 4:53 pm

After a bit of hastle receiving my hoses I have eventually got the engine
fitted.I have a also purchased a stainless manifold.So just a few other
bits to get done and i'll get it all back together before getting it to the
painters.

Image
Image
Image
craig

Best Presented Billing 2011
User avatar
ClubCalibra.net
ClubCalibra.net
 
Posts: 1675
Joined: Sat Mar 13, 2004 4:27 pm
Location: Glasgow

Next

Who is online
Users browsing this forum: No registered users and 16 guests