Low voltage at pump, suspected aftermarket alarm

Any electrical issues

Re: Low voltage at pump, suspected aftermarket alarm

by Martin.p » Fri Mar 27, 2015 2:21 pm

I total agree Dan, I'll be addressing it as next port of call.
Like you say that parts wrong atm. Even if it's te problem or not.
User avatar
ClubCalibra.net
ClubCalibra.net
 
Posts: 90
Joined: Sun Apr 22, 2012 8:53 am

Re: Low voltage at pump, suspected aftermarket alarm

by DanSE4 » Fri Mar 27, 2015 2:31 pm

Smear some Vaseline on your ball sack, touch that on one of the alternator terminals & the end of your knob on the other whilst having an assistant start the engine.

Post a vid of the result as we can determine the level of current being generated by the alternator by the expression on your face. :D
Calibra SE4 3.2 V6 + F28

A Couple of German Cars!
User avatar
ClubCalibra.net
ClubCalibra.net
 
Posts: 613
Joined: Wed Jan 27, 2010 9:43 pm
Location: Dunstable, Bedfordshire.

Re: Low voltage at pump, suspected aftermarket alarm

by Martin.p » Fri Mar 27, 2015 4:28 pm

:D :D :D
User avatar
ClubCalibra.net
ClubCalibra.net
 
Posts: 90
Joined: Sun Apr 22, 2012 8:53 am

Re: Low voltage at pump, suspected aftermarket alarm

by DanSE4 » Fri Mar 27, 2015 5:15 pm


:shhh:

I'd be impressed if it were a V6 & he did it from the top!
Calibra SE4 3.2 V6 + F28

A Couple of German Cars!
User avatar
ClubCalibra.net
ClubCalibra.net
 
Posts: 613
Joined: Wed Jan 27, 2010 9:43 pm
Location: Dunstable, Bedfordshire.

Re: Low voltage at pump, suspected aftermarket alarm

by Martin.p » Fri Mar 27, 2015 7:37 pm

Ok,
I took battery off calibra and fitted it to Mondeo and with it running I get 14+v

So I fitted Mondeo battery to calibra and still only got 13.5v (but it reads 12.9 when not running)

Next I cleaned the terminals on alternator one from alt to engine and one to starter motor.
Sadly it made no change.
Can I remove it and spray loads of carb cleaner in it? Or would that be a waste of time? The car the engine came from had been sat in a barn for I don't know how long. All the Ali is very oxidised.
User avatar
ClubCalibra.net
ClubCalibra.net
 
Posts: 90
Joined: Sun Apr 22, 2012 8:53 am

Re: Low voltage at pump, suspected aftermarket alarm

by Martin.p » Sun Mar 29, 2015 6:31 pm

I've fixed it, I've fixed it. :dance: :band:

It was the hose in the tank.
The return hose that feeds into the bottom of swirl pot wasn't connected to underside of top plate so the returning fuel was going everywhere and not all into pot. So pump was emptying it faster than it could fill so it was not putting enough fuel up to rail.

She drives good and strong now 8)

And now it runs properly it's charging battery and voltage across battery crept up to 13.9v then the fan kicked in.

Just oil leak to sort
User avatar
ClubCalibra.net
ClubCalibra.net
 
Posts: 90
Joined: Sun Apr 22, 2012 8:53 am

Re: Low voltage at pump, suspected aftermarket alarm

by Martin.p » Sun Mar 29, 2015 7:20 pm

Martin.p wrote:
Then I removed the wires from the pump! and checked voltage!
And it read 12.3v
So the 9v I got befor when wires where still attached to pump must of been reading the voltage drop across the pump.

So low voltage at the pump is not the issue with its running.


In short I was doing it wrong lol.
I am getting 12v at pump
User avatar
ClubCalibra.net
ClubCalibra.net
 
Posts: 90
Joined: Sun Apr 22, 2012 8:53 am

PreviousNext

Who is online
Users browsing this forum: No registered users and 20 guests