18" Wheels
9 posts
|Page 1 of 1
18" Wheels
Hi Guys,
I've searched the site but have not been able to find a definitive answer as to whether my cally would experiencing any rubbing with a combination of rim & tyres of 18x8 with an ET 45 rims fitted with 225/35/18's tyres when fitted with eibach springs & koni shocks. I'd like to know if anyone else has a similiar setup and whether or not they experiences any rubbing with this combination, thanks guys.
I've searched the site but have not been able to find a definitive answer as to whether my cally would experiencing any rubbing with a combination of rim & tyres of 18x8 with an ET 45 rims fitted with 225/35/18's tyres when fitted with eibach springs & koni shocks. I'd like to know if anyone else has a similiar setup and whether or not they experiences any rubbing with this combination, thanks guys.
- ClubCalibra.net
- Posts: 148
- Joined: Fri Oct 19, 2007 12:39 am
Re: 18" Wheels
I have 18's but with 215/35, on the old springs and Toyo's they rubbed, old springs Yoko's they didn't. New springs (Spax) they don't.
Mark...........It's Red........It's a V6............It's an SE9!..............and She's bad.
Mark1@clubcalibra.net
ClubCalibra Best Presented 2006
ClubCalibra Best Presented 2010
ClubCalibra Best Interior 2011
My Garage
Mark1@clubcalibra.net
ClubCalibra Best Presented 2006
ClubCalibra Best Presented 2010
ClubCalibra Best Interior 2011
My Garage
Re: 18" Wheels
iv got 18" with 225/40 with 40mm drop only rubs if i bottom it out
steve
Chairman
The Drain
LE 4x4 turbo
SE2 4x4 turbo RIP
Chairman
The Drain
LE 4x4 turbo
SE2 4x4 turbo RIP
Re: 18" Wheels
Thanks Mark and Steve I appreciate the input, I think I'll be safe then on the 18's.
By the way I saw your calibra's in the project section both look fantastic and are inspirational.
All the best, Boris
By the way I saw your calibra's in the project section both look fantastic and are inspirational.
All the best, Boris
- ClubCalibra.net
- Posts: 148
- Joined: Fri Oct 19, 2007 12:39 am
Re: 18" Wheels
Mate...
I've got 18 inch mags with an ET40
So recently I finally decided to do, what I've been thinking about doing, for quite some time now...
I shifted the 225/40 R18 wheels from the Rear to the Front, and fitted some 235/40 R18 tyres at the Rear...
I'm thinking about fitting 215/40 R18's to the Front in the near Future, to ease the Steering a bit...
But I would certainly NOT be fitting tyres of a 35 Profile, as our roads here will kill your wheels in a short time...
Anyway, the First thing that I noticed, was that the Gap at the rear between the wheel and the wheel arch,
was reduced quite a bit, and it looks like 'Lowering' may not be required anymore, which is good for me...
I've driven alot over the last few days, to Test it all out, and not only has the handling improved alot,
but it also feels heaps better when going over the bumps as well...
I'm really happy with the 235's on the Rear, and would suggest it to anyone, except Turbo Owners!
I've got 18 inch mags with an ET40
So recently I finally decided to do, what I've been thinking about doing, for quite some time now...
I shifted the 225/40 R18 wheels from the Rear to the Front, and fitted some 235/40 R18 tyres at the Rear...
I'm thinking about fitting 215/40 R18's to the Front in the near Future, to ease the Steering a bit...
But I would certainly NOT be fitting tyres of a 35 Profile, as our roads here will kill your wheels in a short time...
Anyway, the First thing that I noticed, was that the Gap at the rear between the wheel and the wheel arch,
was reduced quite a bit, and it looks like 'Lowering' may not be required anymore, which is good for me...
I've driven alot over the last few days, to Test it all out, and not only has the handling improved alot,
but it also feels heaps better when going over the bumps as well...
I'm really happy with the 235's on the Rear, and would suggest it to anyone, except Turbo Owners!
The Ghost - V6 Opel
'Calibra with Style'
'Calibra with Style'
- ClubCalibra.net
- Posts: 1103
- Joined: Sun Oct 10, 2010 6:11 pm
- Location: Sydney - Australia
Re: 18" Wheels
Hi Eddy,
Thanks for the advise, I'll see how it goes.
Boris
Thanks for the advise, I'll see how it goes.
Boris
- ClubCalibra.net
- Posts: 148
- Joined: Fri Oct 19, 2007 12:39 am
Re: 18" Wheels
BMJ wrote:Hi Eddey...
Thanks for the advice, I'll see how it goes...
Boris
Mate...
A few of us Sydney Calibra owners are meeting up this weekend...
So if you'd like to check out my wheels in person, PM me your number...
The Ghost - V6 Opel
'Calibra with Style'
'Calibra with Style'
- ClubCalibra.net
- Posts: 1103
- Joined: Sun Oct 10, 2010 6:11 pm
- Location: Sydney - Australia
Re: 18" Wheels
Hi Eddey,
Sounds good, i sent a PM. I wouldn't mind taking my cally for a bit of thrash. Parramatta would be the place for me to meet.
Best wishes Boris.
Sounds good, i sent a PM. I wouldn't mind taking my cally for a bit of thrash. Parramatta would be the place for me to meet.
Best wishes Boris.
- ClubCalibra.net
- Posts: 148
- Joined: Fri Oct 19, 2007 12:39 am
Re: 18" Wheels
I've got 18x7.5" (et42) with 215/35R18 tyres lowered 40mm all round. Loads of room on the rear but very close on the front suspension. I can only just get my finger in between the wheel rim and the suspension - see pic below.
So if you go wider then you'll need to adjust the offset to keep the wheel away from the suspension.
So if you go wider then you'll need to adjust the offset to keep the wheel away from the suspension.
Alan Knight (Topbuzz)
=======================
W: www.topbuzz.co.uk
E: webmaster@topbuzz.co.uk
=======================
=======================
W: www.topbuzz.co.uk
E: webmaster@topbuzz.co.uk
=======================
9 posts
|Page 1 of 1
Who is online
Users browsing this forum: No registered users and 23 guests