C25XE conversion specialists west mids south west area??

Any electrical issues

C25XE conversion specialists west mids south west area??

by calibrepmd » Mon Mar 21, 2011 9:59 pm

C25XE conversion specialists west mids south west area??
Can anybody help me i have a C25XE in a cavalier calibre. was running bu then gave up.seem to have no spark but fuel pump running etc.
i have changed the crank sensor the ignition amp and coil pack but stil nothing.i have also tried a complete new wiring loom and also ECU,
im really at the end of my teather and wondered if anybody new of a conversion specialist that i can get the car trailered too have a look at it?

I am based in hereford .so worcester west midlands or south west cardiff etc etc ??

Thank you.
calibrepmd
 

Re: C25XE conversion specialists west mids south west area??

by calibrepmd » Mon Mar 21, 2011 10:07 pm

the wiring loom doesnt have a diagnostic plug.is there any way of reading this from certain pins off the ecu plug?
calibrepmd
 

Re: C25XE conversion specialists west mids south west area??

by calibrepmd » Mon Mar 21, 2011 10:12 pm

no its non immobilsed the PN type
calibrepmd
 

Re: C25XE conversion specialists west mids south west area??

by calibrepmd » Mon Mar 21, 2011 10:23 pm

so if i use a 12v lamp if i put one wire to pin 22 the other to earth? and connect pin 13 to earth ?correct?
calibrepmd
 

Re: C25XE conversion specialists west mids south west area??

by Fraz » Mon Mar 21, 2011 11:00 pm

calibrepmd wrote:the wiring loom doesnt have a diagnostic plug.is there any way of reading this from certain pins off the ecu plug?



why does it not have one??
User avatar
ClubCalibra.net
ClubCalibra.net
 
Posts: 3621
Joined: Sat Dec 06, 2003 1:00 pm
Location: Rosyth Scotland

Re: C25XE conversion specialists west mids south west area??

by calibrepmd » Mon Mar 21, 2011 11:13 pm

ok just tried that the lamp didnt work??
checked lamp to see if it worked off battery and it did so not a faulty lamp.
calibrepmd
 

Re: C25XE conversion specialists west mids south west area??

by calibrepmd » Mon Mar 21, 2011 11:15 pm

and tried it with two ecu's and neither have worked.
calibrepmd
 

Re: C25XE conversion specialists west mids south west area??

by v6 steve » Mon Mar 21, 2011 11:28 pm

isnt there a live wire that goes from the ecu to the battery ? is it conected
steve
Chairman

The Drain

LE 4x4 turbo

SE2 4x4 turbo RIP
User avatar
ClubCalibra.net
ClubCalibra.net
 
Posts: 7178
Joined: Wed Jan 03, 2007 6:58 pm
Location: lanarkshire

Re: C25XE conversion specialists west mids south west area??

by calibrepmd » Mon Mar 21, 2011 11:34 pm

yeah that is connected as i dabbed the light + onto pin 18 and it lit up.??
The 12v ignigtion feed that goes to pin 4 ot the ignition amp is also in place too...
calibrepmd
 

Re: C25XE conversion specialists west mids south west area??

by calibrepmd » Tue Mar 22, 2011 12:14 am

will try that first thing in the morning.sorry to be a pain.but will the flashing start if i just turn ignition on or do i have to crank the car over?
calibrepmd
 

Re: C25XE conversion specialists west mids south west area??

by calibrepmd » Tue Mar 22, 2011 12:16 am

so will the light start flashing when i turn ignition on or only if i crank over the car?
calibrepmd
 

Re: C25XE conversion specialists west mids south west area??

by v6 steve » Tue Mar 22, 2011 12:20 am

it will just start flashing no need to turn engine over
steve
Chairman

The Drain

LE 4x4 turbo

SE2 4x4 turbo RIP
User avatar
ClubCalibra.net
ClubCalibra.net
 
Posts: 7178
Joined: Wed Jan 03, 2007 6:58 pm
Location: lanarkshire

Re: C25XE conversion specialists west mids south west area??

by calibrepmd » Tue Mar 22, 2011 12:25 am

ok big thank you for help mate.will update tomorrow.
Cheers buddy
calibrepmd
 

Next

Who is online
Users browsing this forum: No registered users and 23 guests
cron