air fuel meter wiring

**pauldarcy** · by **pauldarcy** » Thu Sep 02, 2004 2:05 pm

hoping someone can tell me which of my three wires coming from lamda sensor is my signal wire?is it terminal A,B,C?(calibra turbo 1993)

**leegsi** · by **leegsi** » Thu Sep 02, 2004 3:22 pm

What colour wires are they?

There should be a blue/brown (I think) which is the signal wire

**pauldarcy** · by **pauldarcy** » Fri Sep 03, 2004 5:34 am

HI LEE, I TOO THOUGHT IT SHOULD BE BLUE BROWN AND CONNECTED TO IT, NO LEDS COME ON WITH ENGINE RUNNING. SO IT MUST BE THE ROPEY GAUGE I BOUGHT.....WHAT WITH DROPPING BOOST GAUGE I'M NOT HAVING MUCH LUCK. CAN YOU EMAIL ME TO WORK OUT AN EXCHANGE OF AFR .TA

**leegsi** · by **leegsi** » Fri Sep 03, 2004 6:08 pm

I take it you let the sensor warm up for about 5 minites?

Email me at <a href="mailto:leemmay@hotmail.com">leemmay@hotmail.com</a> and I will get it swapped if its faulty.

Someone else sent one back saying it wasnt working but when I tried it on my car it was fine, Turned out to be his lamder sensor was dodgy and its now fine

**pauldarcy** · by **pauldarcy** » Sat Sep 04, 2004 5:49 pm

apologies Lee, i didn't earth the gauge,so gauge is fine

**leegsi** · by **leegsi** » Sat Sep 04, 2004 9:28 pm

No worrys,

Glad you sorted it (100% fault free record still stands [img]/smile.gif[/img])

air fuel meter wiring

rear arch repair..

About Us

Join ClubCalibra!