REAR SPRINGS PAD BUSH KIT
11 posts
|Page 1 of 1
REAR SPRINGS PAD BUSH KIT
Has anyone fitted these, or anything similar to the Calibra???
They come in the following sizes: 6mm, 8mm, 10mm and 12mm
Any information will be much appreciated...
http://www.ebay.com.au/itm/WHITELINE-VA ... 4160f80964
They come in the following sizes: 6mm, 8mm, 10mm and 12mm
Any information will be much appreciated...
http://www.ebay.com.au/itm/WHITELINE-VA ... 4160f80964
The Ghost - V6 Opel
'Calibra with Style'
'Calibra with Style'
- ClubCalibra.net
- Posts: 1103
- Joined: Sun Oct 10, 2010 6:11 pm
- Location: Sydney - Australia
Re: REAR SPRINGS PAD BUSH KIT
What do they do?
Mark...........It's Red........It's a V6............It's an SE9!..............and She's bad.
Mark1@clubcalibra.net
ClubCalibra Best Presented 2006
ClubCalibra Best Presented 2010
ClubCalibra Best Interior 2011
My Garage
Mark1@clubcalibra.net
ClubCalibra Best Presented 2006
ClubCalibra Best Presented 2010
ClubCalibra Best Interior 2011
My Garage
Re: REAR SPRINGS PAD BUSH KIT
Mark1 wrote:What do they do?
I think they are fitted to adjust the ride height, with Lowering Springs...
But is there any such a part, fitted to the Calibra Rear Springs as Standard???
As My Rear Springs don't appear to be level, and was wondering if this might be the cause!!!
The Ghost - V6 Opel
'Calibra with Style'
'Calibra with Style'
- ClubCalibra.net
- Posts: 1103
- Joined: Sun Oct 10, 2010 6:11 pm
- Location: Sydney - Australia
Re: REAR SPRINGS PAD BUSH KIT
They fit under the rear coil spring. I made them out of a bit of 6mm conveyor belt to help reduce the rear camber until I can alter the suspension arm.
Alan
Alan
- Gold Club Member
- Posts: 189
- Joined: Wed Feb 07, 2007 3:34 pm
- Location: Portsmouth
Re: REAR SPRINGS PAD BUSH KIT
vec 160 wrote:They fit under the rear coil spring. I made them out of a bit of 6mm conveyor belt to help reduce the rear camber until I can alter the suspension arm.
Alan
Mate...
Did You do the 'Rear Springs' Job Yourself?
I was wondering if there are any of these fitted already, as Standard at the Rear Springs???
The Ghost - V6 Opel
'Calibra with Style'
'Calibra with Style'
- ClubCalibra.net
- Posts: 1103
- Joined: Sun Oct 10, 2010 6:11 pm
- Location: Sydney - Australia
Re: REAR SPRINGS PAD BUSH KIT
It can be seen clearly in this photo, at the base of the spring...
The Ghost - V6 Opel
'Calibra with Style'
'Calibra with Style'
- ClubCalibra.net
- Posts: 1103
- Joined: Sun Oct 10, 2010 6:11 pm
- Location: Sydney - Australia
Re: REAR SPRINGS PAD BUSH KIT
I just bought a Pair of these Whiteline 12mm Pads for $57.51
http://www.ebay.com.au/itm/161829259991 ... EBIDX%3AIT
http://www.ebay.com.au/itm/161829259991 ... EBIDX%3AIT
- Attachments
-
- Rear Spring Pads.jpg (8.6 KiB) Viewed 22696 times
The Ghost - V6 Opel
'Calibra with Style'
'Calibra with Style'
- ClubCalibra.net
- Posts: 1103
- Joined: Sun Oct 10, 2010 6:11 pm
- Location: Sydney - Australia
Re: REAR SPRINGS PAD BUSH KIT
EddeyDancer wrote:I just bought a Pair of these Whiteline 12mm Pads for $57.51
http://www.ebay.com.au/itm/161829259991 ... EBIDX%3AIT
So I recently fitted some New KYB Rear Shocks with K-Mac Springs...
Being that the Springs lowered the car too much, I fitted some Whiteline Rear Spring Pad Bushing, to adjust the ride height, to my liking...
I'm really pleased with the Performance and Looks...
viewtopic.php?f=16&t=45499&start=315
The Ghost - V6 Opel
'Calibra with Style'
'Calibra with Style'
- ClubCalibra.net
- Posts: 1103
- Joined: Sun Oct 10, 2010 6:11 pm
- Location: Sydney - Australia
Re: REAR SPRINGS PAD BUSH KIT
Original Rubber pads are still available
part # 90447199
part # 90447199
Details on how to join the club---Click me
Re: REAR SPRINGS PAD BUSH KIT
callyman wrote:Original Rubber pads are still available part # 90447199
I used them in addition to, not as replacements, to adjust the ride height...
The Ghost - V6 Opel
'Calibra with Style'
'Calibra with Style'
- ClubCalibra.net
- Posts: 1103
- Joined: Sun Oct 10, 2010 6:11 pm
- Location: Sydney - Australia
11 posts
|Page 1 of 1
Who is online
Users browsing this forum: Google [Bot] and 14 guests