Newbie rolling resto.

Show off your Projects here, the link for the garage is at the top of the page for showcasing your car

Re: Newbie rolling resto.

by pigthief » Wed Jan 08, 2020 4:45 pm

Managed to get a quick pic of the teach yourself to weld class project today.

2 holes patched and nearly finished, as a self taught welder my teacher was a thickie.

Couple more unnatural holes in the floor to deal with then it's up on the ramp on Friday for rub down and paint.

Image

Sent from my HTC One using Tapatalk
User avatar
Club Member
Club Member
 
Posts: 135
Joined: Fri Sep 13, 2019 8:18 am

Re: Newbie rolling resto.

by Cliff » Wed Jan 08, 2020 5:04 pm

It’s trying that counts


Sent from my iPhone using Tapatalk
User avatar
Site Admin
Site Admin
 
Posts: 497
Joined: Tue Jan 05, 2016 11:26 pm
Location: Linköping, Sweden

Re: Newbie rolling resto.

by pigthief » Wed Jan 08, 2020 5:05 pm

Cliff wrote:It’s trying that counts


Sent from my iPhone using Tapatalk


Sent from my HTC One using Tapatalk
User avatar
Club Member
Club Member
 
Posts: 135
Joined: Fri Sep 13, 2019 8:18 am

Re: Newbie rolling resto.

by pigthief » Fri Jan 10, 2020 4:05 pm

Few hours on a ramp today, never enough time. But this bit looks loads better. Had the front floor pan ready for paint, just waiting on the seam sealer to set. Image

Sent from my HTC One using Tapatalk
User avatar
Club Member
Club Member
 
Posts: 135
Joined: Fri Sep 13, 2019 8:18 am

Re: Newbie rolling resto.

by rich30mex » Wed Jan 22, 2020 6:37 pm

pigthief wrote:Accidentally bought these todayImage

Sent from my HTC One using Tapatalk

They look sweet what they out of I'm toying with the idea of retriming some mk4 Astra gsi ones for the front of the welly
THE TEA BAG Calibra l,e number 4
THE WELLY rio verdi ecotec on a N reg
UNCLE ALBERT gray 8v on a J reg

Best engine bay 2011
Best engine bay 2014
Best in show 2016
Treasures cup 2016
Best engine bay 2017
Best modern retro total retro 2018

mag features
practical classics
modern classic
performance vauxhall


Have car have cloth will clean need life
User avatar
Events Coordinator
Events Coordinator
 
Posts: 3165
Joined: Sat Jan 03, 2009 11:19 am
Location: a hovel

Re: Newbie rolling resto.

by pigthief » Wed Jan 22, 2020 7:27 pm

rich30mex wrote:
pigthief wrote:Accidentally bought these todayImage

Sent from my HTC One using Tapatalk

They look sweet what they out of I'm toying with the idea of retriming some mk4 Astra gsi ones for the front of the welly
These are e class amg seats.

Sent from my HTC One using Tapatalk
User avatar
Club Member
Club Member
 
Posts: 135
Joined: Fri Sep 13, 2019 8:18 am

Re: Newbie rolling resto.

by pigthief » Fri Jan 24, 2020 5:09 pm

So had her first MOT and thought it would fail on emissions but steamed to be fine.

Of the 8 welds I did 7 passed judgement so happy with that.

Inspectors found 1 New hole, bugger and a edge I missed on my weld whoops, and a hole I thought was ok.

Though the front arches need fixing and the driver's strut top is badly welded, so these things I need to sort asap.

SAFETY FAIL DO NOT DRIVE. Bugger.

Sent from my HTC One using Tapatalk
User avatar
Club Member
Club Member
 
Posts: 135
Joined: Fri Sep 13, 2019 8:18 am

Re: Newbie rolling resto.

by pigthief » Sat Jan 25, 2020 6:37 pm

Well this is what it looked like this morning,wasn't as bad as I expected but worse than I hoped.

New metal in the top and side so far, pic tomorrow once it's finishedImage

Sent from my HTC One using Tapatalk
User avatar
Club Member
Club Member
 
Posts: 135
Joined: Fri Sep 13, 2019 8:18 am

Re: Newbie rolling resto.

by Phill » Sat Jan 25, 2020 9:52 pm

Your doing a good job at keeping another calibra on the road mate :)
Phill.
User avatar
Gold Club Member
Gold Club Member
 
Posts: 694
Joined: Mon Oct 17, 2011 4:20 pm
Location: Grangemouth

Re: Newbie rolling resto.

by pigthief » Wed Jan 29, 2020 5:30 pm

Cheers matey

Sent from my HTC One using Tapatalk
User avatar
Club Member
Club Member
 
Posts: 135
Joined: Fri Sep 13, 2019 8:18 am

Re: Newbie rolling resto.

by pigthief » Wed Jan 29, 2020 5:31 pm

And after.

Waiting for paint to be dry enough to put arch liner back in, once that's done I move to the next one on the list. Image

Sent from my HTC One using Tapatalk
User avatar
Club Member
Club Member
 
Posts: 135
Joined: Fri Sep 13, 2019 8:18 am

Re: Newbie rolling resto.

by pigthief » Sat Feb 01, 2020 8:40 pm

So after much thought I think I have found a name for the calibra. Meet the bucket. She will be well patched and back on the road tomorrow. Image

Sent from my HTC One using Tapatalk
User avatar
Club Member
Club Member
 
Posts: 135
Joined: Fri Sep 13, 2019 8:18 am

Re: Newbie rolling resto.

by pigthief » Wed Feb 05, 2020 5:44 pm

Well after the best part of a weeks work I have a legal calibra. Pictures to follow and now I am moving onto nice bits and fitting my new rear bench seats.

Sent from my HTC One using Tapatalk
User avatar
Club Member
Club Member
 
Posts: 135
Joined: Fri Sep 13, 2019 8:18 am

Re: Newbie rolling resto.

by Cliff » Wed Feb 05, 2020 6:25 pm

Congrats, hard work paid off! Looking forward to seeing more as you progress!


Sent from my iPhone using Tapatalk
User avatar
Site Admin
Site Admin
 
Posts: 497
Joined: Tue Jan 05, 2016 11:26 pm
Location: Linköping, Sweden

Re: Newbie rolling resto.

by pigthief » Fri Feb 07, 2020 5:03 pm

So a bit of work done today, headliner off and out. Was a bit of a fiddle and now has a crack in it but I hope I can repair it.

People like to use sealant to bodge s**t. The sunroof motor was extremely loose found some of the bolts and refitted hopefully the sunroof will work now.Image

Sent from my HTC One using Tapatalk
User avatar
Club Member
Club Member
 
Posts: 135
Joined: Fri Sep 13, 2019 8:18 am

PreviousNext

Who is online
Users browsing this forum: No registered users and 20 guests